Red BlackberryUpon sending an SMS Message an error message is displayed “Short Message Transfer Rejected” with a red cross. This issue is displayed due to an error with the contact number you are trying to send to. E.g. I recently imported some number using Google Sync , and it wiped the first zero off the number. The only way round this is to fix the number in your contact list. Copy the text of the errored text message , delete the message , and recreate a new one with the contact ( with correct number ) and paste the message back
VN:F [1.9.22_1171]
Rating: 6.8/10 (28 votes cast)
VN:F [1.9.22_1171]
Rating: -6 (from 10 votes)
blackberry_enterprise_server After wiping a device and updating it to the lastest forware using blackberry desktop manager, the device didn’t register with the blasckberry network. Upon trying to register the device with the BES server a message is displayed “‘acquiring service connection” After a short wait the following is displayed ‘Activation Request Failed – Service Connection Is Unavailable’. This issue is down to the device not being able to connect to the 3G network. Usually confirmed by the top right of the blackberry screen having a lower case gprs instead of capitals ( GPRS ) If your device is definately on a data plan from the provider that supports blackberry and has been working before try this fix Perform a Hard Reset (pull the battery out WITHOUT turning the Blackberry off (VERY IMPORTANT THIS!)) Wait 5 seconds and put the battery back in and wait for the 3-5 mins until the device restarts If this is a new device and you are not sure if your service provider has enabled blackberry support on your data plan give them a call!
VN:F [1.9.22_1171]
Rating: 7.7/10 (3 votes cast)
VN:F [1.9.22_1171]
Rating: +1 (from 1 vote)
Share Point Sever 2007Upon installing  Sharepoint Server 2007 standard or Enterprise it came up with an error : This program is blocked due to compatibility issues Program Compatibility Assistant Follow the steps: 1. Download and install : Windows SharePoint Services 3.0 with Service Pack 1 32 Bit Version or Windows SharePoint Services 3.0 with Service Pack 64 bit Version Depending on your Server install 2. Download : 2007 Microsoft Office Servers Service Pack 1 (SP1) Copy it to c:\temp folder. 3. Extract this exe. To do so, run this command from command prompt: c:\temp\Officeserver2007sp1-kb936984-x86-fullfile-en-us.exe /extract:c:\temp1 This extracts the installation contents into folder c:\temp1 <– For 32 Bit c:\temp\officeserver2007sp1-kb936984-x64-fullfile-en-us /extract:c:\temp1 This extracts the installation contents into folder c:\temp1 <– For 64 Bit Copy the Contents of the Sharepoint Server 2007 Installation Files to C:\SharepointServer2007\ 4. Copy all the contents of c:\temp1 into “C:\SharepointServer2007\(x86 or x64)\Updates” 5. Run Setup .exe again
VN:F [1.9.22_1171]
Rating: 9.5/10 (2 votes cast)
VN:F [1.9.22_1171]
Rating: +1 (from 1 vote)
gmail_blackberry If you set up a user on Google Apps or Gmail and link it to their Blackberry Internet Services the user will get a copy of each sent item in their inbox. This can get frustrating however never fear , there is a simple fix. Luckily Blackberry Internet Services comes with a filter for incoming messages Log into your BIS account through any one of these links depending on your provider T-Mobile: BlackBerry Internet Service Tmobile (U.K) Vodafone :Blackberry Internet Services Vodafone UK Orange :Blackberry Internet Services Orange UK O2 : Blackberry Internet Services 02 UK Log in with your username and password , if you already haven’t done this you can create a new account using your Devices Pin ( Found in  Options then Status ) Select the Gmail or Google Apps Email Account from the list , and select the filters button blackberryfilters Edit the filter options below to discard any messages from yourself Blackberry Filter Save and your done!
VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)
usb_memory_stick_phone_cp_gt_1380_1 A client needed to copy a file larger than 5 Gigabytes to a 16 Gigabyte Memory Stick. Due to the standard partitions of external storage being FAT32 , file copying failed. Formatting an external Hard Disk is easy through Disk Management in ( Control Panel , Administration Tools , Computer Management ). However there are a few tips to bear in mind when it comes to Memory Sticks First due to technology limitations of the flash chips, there is a limitation on how many times it can be written to (around 10000 Times). NTFS also uses more activity on its file systems due to its Journaling File System to Log everything performed. To ready your device for formatting, Go to Device Manager ( Right Click My Computer , Properties , Hardware ) and find your USB or Memory Stick under the Disk Drives Section. Double click on your device “optimize for performance” Under the Policies Tab optimize-for-performance1 Then run this command in the command Prompt convert u: /fs:ntfs ( u: being the drive letter of the memory stick) If this brings back an error about exclusive access to the drive being denied , restart the computer and after startup, without opening anything up, try this again
VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: +1 (from 1 vote)
Gallery Logo Installing this addin (WPG2) to integrate my Open Source PHP Gallery into my word press Blog and adapt to the blog theme to the gallery with a single click , produced this error when editing User’s or Viewing the gallery from WordPress
Fatal G2 error Here’s the error from G2: Error (ERROR_MISSING_OBJECT) wp-content/plugins/wpg2/wpg2embed.inc at line 468 (GalleryCoreApi::error) wp-content/plugins/wpg2/wpg2embed.inc at line 231 wp-content/plugins/wpg2/wpg2embed.inc at line 111 wp-content/plugins/wpg2/wpg2functions.inc at line 523 in ??? at line 0 wp-includes/plugin.php at line 311 wp-includes/general-template.php at line 866 wp-content/themes/paalam-11/header.php at line 17 wp-includes/theme.php at line 472 wp-includes/general-template.php at line 8 wp-content/themes/paalam-11/index.php at line 1 wp-includes/template-loader.php at line 24 wp-blog-header.php at line 20 index.php at line 4
Upon research , the only way round this error was the installation of this plug-in : http://wordpress.org/extend/plugins/bluetrait-event-viewer/ This resolved both errors!
VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)
I recently noticed the speed of my computer reduced dramatically. Upon examination of Task Manger it seemed that the executable “Microsoft User-Mode Driver Framework Install-v1.0-WinXP.exe” was running every 5 Seconds and creating a Temporary directory in C:\WINDOWS\Temp under the format of Folders such as “WDF20F.tmp”. By the time I had investigated there was well over 500 folders !!! I removed these through the command prompt with command “rd /s /q C:\WINDOWS\Temp\” I then did some investigation to what was causing the issue. This was Nokia PC suite trying to install the phone drivers for a phone that wasn’t even connected to my computer! I stopped this by opening up device manager and removing my phone from the device manager list.
VN:F [1.9.22_1171]
Rating: 7.7/10 (3 votes cast)
VN:F [1.9.22_1171]
Rating: -1 (from 1 vote)
A computer with the LogMeIn Free Client installed randomly generated the error message “LMIRfsclientNP.dll is not a valid Windows Image” on logging into windows. This is due to a corruption of the file accessed by Net and Userinit.exe. To clear this error simply reinstall the LogMeIn Free Client. You can get this from www.logmein.com
VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: +2 (from 2 votes)
A client recently upgrade from to the latest version of Sage Line Accounts ( 2009 ). When starting the program and going to the default directory for the company folders ( C:\Program Files\line 50\) and selecting the chosen company folders Company.001 , Company.002 Etc it produced the error “No data found in this directory” A manual work around is: Close Sage Copy the folders into the new default storage of Sage 2009 ( C:\Documents and Settings\All Users\Application Data\Sage\Accounts\2009 ) from the old verison sage default location ( C:\Program Files\line 50\) Then Edit the file “C:\Documents and Settings\All Users\Application Data\Sage\Accounts\2009\COMPANY” in notepad And manually add the new folders to that list e.g. C:\DOCUMENTS AND SETTINGS\ALL USERS\APPLICATION DATA\SAGE\ACCOUNTS\2009\COMPANY.000 C:\DOCUMENTS AND SETTINGS\ALL USERS\APPLICATION DATA\SAGE\ACCOUNTS\2009\COMPANY.001 Save the file and open up sage and you should see your new companies in the company list, select one and it will ask you to upgrade the company folder to the new version
VN:F [1.9.22_1171]
Rating: 10.0/10 (1 vote cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)
Adove Reader Logo

Adove Reader Logo

Installing a new version of Adobe Reader e.g. 9 or unistalling an older version can sometimes bring up the Error : Internal error 2753. Updater.api-NON-OPT during installation and not install Adobe Reader .. Useful!! To get round this error Download the Windows Installer Cleanup Utility package , install , and open through Start , Program Files , Windows Installer Cleanup Utility Find any old Versions of Adobe Reader in the list and remove them, once this is done , rerun the Adobe installation or un-installation

VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)