Internet Information Services Error ( OWA! )

Internet Information Services Error ( OWA! )

After installing applications on Small Business Server 2008 such as VMware Server 1.08 , This may stop and break IIS 7.  This is usually down to the issue stated here , http://support.microsoft.com/default.aspx?scid=kb;en-us;894435 ( ISS 6 or 7 Does not like running ASP 32bit and 64bit at the Same Time on the 64 bit computer ) In the Event Log it brings up this error The Module DLL C:\Windows\system32\RpcProxy\RpcProxy.dll failed to load with Source: W3SVC-WP The way to fix this problem with Exchange 2007 is Go to Start , Type CMD , then Press CTRL , SHIFT and Enter to open the command prompt with Administrive Rights if not already logged in as administrator Fire off these 2 Commands
  1. cscript %SYSTEMDRIVE%\inetpub\adminscripts\adsutil.vbs SET W3SVC/AppPools/Enable32bitAppOnWin64 0
  2. %SYSTEMROOT%\Microsoft.NET\Framework64\v2.0.50727\aspnet_regiis.exe -i
Restart ISS if needed
VN:F [1.9.22_1171]
Rating: 9.0/10 (1 vote cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)
HP’s Proliant ML350 G5 has started shipping with a SATA dvd writer. Upon installation of Windows 2003 Server using the HP SmartStart disks , there is no DVD drive listed in Windows Device Manager , Windows
HP Proliant ML350 G5
Disk Management or under My Computer. This can be resolved by -Shutting down the server -Opening the case and locating the dip switches on the bottom right of the main board
HP Proliant ML350 G5
-Flicking up switch 6  ( Maintenance Switch ) – Powering up the server until it gets to the error screen ” Please put the maintenance switch to the off position” – Power the server off , and as said ” put the maintenance switch to the off position” (Switch 6) – Power up the server and you should have a DVD rom drive again , this is only a temporary fix , HP are aware and should be working on a solution Added****** This is now fixed with Bios : 2008.08.04 (A) 26 Aug 2008 http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&prodNameId=3279711&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-6d7148a9cb4740d3837fe26303
VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)

9106-wireless-connection11.jpg

Problem with Windows Vista Connecting to Sky Box

To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

1.Click On the Start button, type regedit in the Start Search box, and then click regedit in the Programs list. 2.Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

\Interfaces\{GUID} In this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network. 3.On the Edit menu, point to New, and then click DWORD (32-bit) Value. 4.In the New Value #1 box, type DhcpConnEnableBcastFlagToggle, and then press ENTER. 5.Right-click DhcpConnEnableBcastFlagToggle, and then click Modify. 6.In the Value data box, type 1, and then click OK. 7.Close Registry Editor.

 

NOTE: You should do this for each and every GUID subkey. NOTE2: (GUID) is a mnemonic for the individual subkeys, the actual text “GUID” does not appaer.

VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)

Windows 2000 Setup Screen

This iso file , enables you to boot off the Windows XP Bootable floppy disks and run the Windows 2000 Registry Repair Tool , created with the help of Jayroo’s Instructions Below ( This is usually brought about by the system crashing or pulling the power early on the system before it has had time to properly shut-down )
VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)