In configuring a IPSec site to site vpn with SRX 240 we need to set the st0/1/2 Adapters to manual addressFor this I choose 172.27.0.0 Subnet 30 […]
Author: paris
Enabling Dynamic VPN on SRX disable’s access to JWEB by redirect
http://kb.juniper.net/InfoCenter/index?page=content&id=KB19411&smlogin=true&actp=searchPer the above KB run set system services web-management management-url adminTo change the URL to jweb to https://x.x.x.x/admin
Juniper SRX 240 VPN No proposal chosen
Jun 8 01:55:03 SRX kmd[15418]: IKE negotiation failed with error: No proposal chosen. IKE Version: 1, VPN: Not-Available Gateway: Not-Available, Local: xxx.xxx.xxx.xxx/500, Remote: xxx.xxx.xxx.xxx/500, Local IKE-ID: Not-Available, Remote […]
IBM xSeries X3650 M5 Raid Configuration
Just had to spend an hour getting someone to setup a Raid array with hot spare via the phone on a new server, Not sure why it took […]
unable to locate the necessary files to perform this officelink – MYOB
When trying to Send to Excel in the Inventory Reports I get the following error in MYOB v19.9 Premierunable to locate the necessary files to perform this […]
Dell 2700W UPS Console Login and HTTPs
Default password for console is adminAfter setting the IP , you need to reset the management cardOnce reset , the http webserver listens , then when you browse […]
Commvault FIleserver Kaspersky Exclusions
Recently installing Kaspersky on some fileservers , caused the shares to hang which could only be fixed by restarting the Commvault Agent on the server. This is […]
MYOB crashing on start
Upon opening MYOB the software crashes and displays below error message This was due to the .myox being used by OneDrive/Dropbox ( being sycned) at the same time […]
How to renew SSL Certificate on Secure Citrix Gateway
Recently I went through this to update a Cert on a Gatewat: http://fixmyitsystem.com/2012/07/configure-citrix-xenapp-web-site-to-use.htmlHowever the SSL certificate was still not updatedIf you route traffic over a different port you […]
Dell N Series switch for iSCSI
Configuration:Disable DCB:enableconfigureno dcb enableexitConfigure out of band management port:enableconfigureinterface out-of-bandip address X.X.X.X /24 192.168.1.1exitHttp and telnet authentication:enableconfigline telnetlogin authentication defaultexitip http authentication localSSH keygen and enableconfigurecrypto key generate […]
