Recently trying to install a Module in Powershell gallery on a PC , but came back with an error
Had a check and No Repos were listed
Installed the Default Repos again
loading...
loading...
Recently trying to install a Module in Powershell gallery on a PC , but came back with an error
Had a check and No Repos were listed
Installed the Default Repos again
When you plug in a fortiextender , it will take the default route by putting its distance as 5
To change this back to secondary , change the Distance of the interface to over the default ( 10) or reduce the primary distance to under 5
You can also use this https://kolbi.cz/blog/2017/10/25/setuserfta-userchoice-hash-defeated-set-file-type-associations-per-user/
GPO Set a default associations configuration file under Computer Configuration > Administrative Templayes > Windows Components > File Explorer
Save the follwing file as an XML and use this
In case your default associations for .nrl files goes astray , this application is responsible :
C:\Program Files (x86)\iManage\Work\iwlnrl.exe
Recently I setup a DELL n2024p however did not have a usb to serial cable to get console access. I used port scanner to find the IP of the device as default it will use DHCP which took me to the open manage web login. I tried to search and use many default logins however none worked. It seems the only way to get this password is use the console cable to set it!