HP have forced people to use the Web interface on the new range of switches , however you can enable advanced cli through : Using _cmdline-mode onwith Password: Jinhua1920unauthorizedTo find […]
Author: paris
Get list of Windows Updates needed to be installed on Virtual Machine Enviroment Vmware/ Powershell
Run Vmware PowercliRun Connect-ViServer %name of server%Run the output of below to a text fileE.g. .\Get-PendingUpdate.ps1 | Output-File file.txt
Juniper SRX 240 IP SEC Static Route not showing up in Show Route
Trying to get site to site route based VPN working with 2 x SRX 240’s with the config ; routing-options {static {route 192.168.60.0/24 next-hop 172.27.0.18This was worked on […]
iLO HP ML380 G7 Certificate Error SSL_ERROR_BAD_MAC_ALERT / ERR_SSL_VERSION_OR_CIPHER_MISMATCH
On trying to get to it in Firefox I was presented with SSL_ERROR_BAD_MAC_ALERT On trying to get to it through Chrome I was presented withThis site can’t provide a secure […]
How to enable SIP traffic outbound/inbound on Fortinet/Fortigate
Below changes were added.Added TCP 5060 for SIP(As sometimes this can be TCP/UDP) for all WANSRTP port range 6200 – 6214 added for Inbound for all WANSSIP domains allowed […]
Cannot assign address 0 on subnet/Cannot assign broadcast address as ip address Juniper
In configuring a IPSec site to site vpn with SRX 240 we need to set the st0/1/2 Adapters to manual addressFor this I choose 172.27.0.0 Subnet 30 […]
Enabling Dynamic VPN on SRX disable’s access to JWEB by redirect
http://kb.juniper.net/InfoCenter/index?page=content&id=KB19411&smlogin=true&actp=searchPer the above KB run set system services web-management management-url adminTo change the URL to jweb to https://x.x.x.x/admin
Juniper SRX 240 VPN No proposal chosen
Jun 8 01:55:03 SRX kmd[15418]: IKE negotiation failed with error: No proposal chosen. IKE Version: 1, VPN: Not-Available Gateway: Not-Available, Local: xxx.xxx.xxx.xxx/500, Remote: xxx.xxx.xxx.xxx/500, Local IKE-ID: Not-Available, Remote […]
IBM xSeries X3650 M5 Raid Configuration
Just had to spend an hour getting someone to setup a Raid array with hot spare via the phone on a new server, Not sure why it took […]
unable to locate the necessary files to perform this officelink – MYOB
When trying to Send to Excel in the Inventory Reports I get the following error in MYOB v19.9 Premierunable to locate the necessary files to perform this […]