Recently I got errorsHeight: The attribute logo.height has an invalid value.Width: The attribute logo.width has an invalid value.Per here : https://developers.google.com/structured-data/rich-snippets/articlesLogos should have a wide aspect ratio, not […]
Author: paris
Vmware Site Recovery Manager with NetApp Snapmirror
When using Netapp Snap Mirror to clone Volumes to another site / netapp containing Datastores , you can back this up with Vmware’s Site Recovery Manager to […]
Adding new SC220 Enclosures to a SC8000 SAN in Daisy Chain Mode
If I understand correctly, these are 4x SC220 enclosures for the SC8000 SAN. Although there is no IO interruption to the SAN, ideally this should be done […]
Migrate VDM’s from one SAN to Another
It might be worth checking if these still need to be RDM’s. This was previously used for older versions of VMDK’s could only use 2TB , now […]
Juniper Exam Revision Notes
Deploy vSRX – VMware WorkstationRE – Routing Engine— Manages the PFE— Maintins Routing Tables— Manages the Packet Forwarding EnginePFE – Packet Forward Engine— Is incharge of Policing […]
Juniper Config for an SRX 240 in Failiver mode
Adding Domain/Forest Trust
Set DNS Forwarders between domains using either one of theseConditional Forwarder – How to configure a Conditional Forwarder in DNSStub Zone – How to configure a DNS […]
the type 11 controller is not supported by this firmware
Was recently trying to update a PS6000 SAN from Firmware upgrade Failure from V5.0.8 to V6.0.7FYI when trying firmware updates make sure you have the passive controller […]
Aerohive Managed Guest ticketing authentication setup
Private Pre-Shared Key: Simplified AuthenticationOrganizations that are planning wireless LAN’s to support corporate devices, BYOD, guest access, may be struggling to find the balance between flexibility and […]
Cisco ASA Let passive FTP Through – Terminated by inspection engine
The inspection engine is looking at the ftp protocol and finding something objectionable in that user’s sessions. Exactly what is hard to say without debugging or capturing […]