By default a IPSec tunnel will only come on when traffic is passed throughHowever if you enable Auto-Negotiate at both ends it will stay uphttps://community.fortinet.com/t5/FortiGate/Technical-Tip-Using-the-IPSec-auto-negotiate-and-keepalive/ta-p/189536
Category: Research
Research Undertaken
Download RD9700 USB2.0 VID_0FE6&PID_9700 – Windows 10 Driver
https://pariswells.com/blog/wp-content/uploads/2022/02/CoreChips-RD-9700-Win.zip
How to use Vocus details from Service Delivery
Allocated Link IPs%SubnetIPAddress%/30 = Subnet to use for IPVocus End%IP Address of Gateway for routing%Customer End%IP Address for Customer%Vocus DNS Server 1111.220.1.1Vocus DNS Server 2111.220.2.2
Fortiextender taking default route
When you plug in a fortiextender , it will take the default route by putting its distance as 5To change this back to secondary , change the […]
Mimecast – Relaying from External to External using a forward ( External Relay )
If you setup a Forward for a user to an external user , and a external party email’s that user , then this counts as external to […]
Sentinelone blocks Microsoft MDT LiteTouch
Recently had a customer where the PC would install windows via MDT but Litetouch would never appear to install the applicationsA closer look and we deployed a […]
ASP.NET C# project to send e-mail via Office 365 starts firing net_io_connectionclosed
System.IO.IOException: Unable to read data from the transport connection: net_io_connectionclosed. at System.Net.Mail.SmtpReplyReaderFactory.ProcessRead(Byte[] buffer, Int32 offset, Int32 read, Boolean readLine) at System.Net.Mail.SmtpReplyReaderFactory.ReadLines(SmtpReplyReader caller, Boolean oneLine) at System.Net.Mail.SmtpReplyReaderFactory.ReadLine(SmtpReplyReader caller) […]
How to add Vlan’s to UCS Clusters
Declare the Vlan hereAdd new vlan here to service profile here as not using Vnic Templates
Recovery Network not listed in Zerto
Trying to change a zerto VM’s recovery network however the new Network I created in vmware wasn’t showingIf you use Zerto Cloud Manager you will need to […]
RDP Gateway – the remote resource can’t be reached
After upgrading a RDP Broker server ( and webgateway ) from 2012 R2 – 2019 and then the session host , trying to connect to the Collection […]
