Posts Tagged ‘DR’

Upon restoring a domain controller to a new or isolated network in example a DR environment, the domain controller will lose access to its other domain controllers for replication. You might find you cannot start the DNS server and or Active directory services.

To force the server to start without checking for others modify the below key and reboot the server

 Add the Following reg Key

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters
Value name:  Repl Perform Initial Synchronizations
Value type:  REG_DWORD
Value data: 0

You should then go into Active Directory Sites and services and remove the old Domain Controllers and Also go into the DNS server and remove any references in the Nameserver tabs for the Zones

_msdcs.domain.local

domain.local

VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)

Error: Unable to find SRA files. You must install SRA before adding or modifying an array manager.

Troubleshooting steps:

1.Took RDP to both the SRM servers.
2. Reset the administrator@vsphere.local passwords for both the VCs.
3. Performed Modify/install on both the SRM servers.
4. Reconfigured array pairing by typing the pureuser ID and password.

VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)