Welcome to Pariswells.com » WET54G http://pariswells.com/blog Tue, 08 May 2012 10:46:01 +0000 en hourly 1 http://wordpress.org/?v=3.3.2 Details for Linksys WET54G Wireless Bridge! http://pariswells.com/blog/notes/details-for-linksys-wet54g-wireless-bridge http://pariswells.com/blog/notes/details-for-linksys-wet54g-wireless-bridge#comments Sun, 09 Nov 2008 22:54:28 +0000 paris http://pariswells.com/blog/?p=67 WET54G Close Up

WET54G Close Up

Recently after setting up a Linksys Wireless-G Ethernet Bridge WET54G to bridge an Xbox 360 to a wireless network rather than using a Xbox 360 Wireless Card, it randomly lost its configuration. Reconfiguring this device should of been easy , but not when Linksys try and make it hard as possible to get the information out!
  1. Right , so first port of call , hold down the reset button for 30 Seconds to reset to factory configurations
  2. Linksys’ “quick guide” states that you need the CD to start the Configuration Launcher .. Who Keeps CD’s Nowadays?
  3. Try and find the Software on the WET54G Page with My Version 2 Product
  4. Nothing! , Contact Linksys 24/7 Chat Support , After 10 Mins , shows me back to the download Page
  5. After more investigation this is only available on the Version 3 Product Page ??? Here’s the link you need! WET54G_Wizard_2_13.zip
  6. Installed the Configuration Software however if you are doing this remotely for a friend via his Wireless Internet and the Bridge is connected to the Ethernet Port , the software can’t check both ports even if if windows can ping it!
  7. Right , Go to it Manually , its standard IP address is
IP Address : 192.168.1.226 Username : *Don’t Enter one!* Password : admin From here you can fully configure the product and rejoin it to the wireless network!]]> http://pariswells.com/blog/notes/details-for-linksys-wet54g-wireless-bridge/feed 0